Mark Price vs Index Price on LMEX: The Number That Decides Whether Your Position Survives

Mark price and index price govern your PnL and liquidation on LMEX. This guide explains both, how they're calculated, and why they matter for every futures trader.

Mark Price vs Index Price on LMEX: The Number That Decides Whether Your Position Survives

Three prices sit on every LMEX futures screen and they do different jobs. Last price fills your orders and draws the candles. Index price says what the asset is worth on spot markets elsewhere. Mark price decides your unrealised PnL and whether you get liquidated. If you have ever watched a wick touch your liquidation level and nothing happened — or watched a position close while the chart looked fine — the gap between these three is the reason.

Most explanations of this stop at the definitions. This one goes to the part that costs money: the specific formula LMEX uses, the 2% condition that changes it, and what each of those means when you are sizing a trade.

Why three prices exist at all

A perpetual futures contract has no expiry, so there is nothing forcing its price to converge with spot. The contract trades on LMEX’s own order book, and that book can move independently of the wider market — thinly, briefly, or because someone wants it to.

If liquidations were triggered by the last traded price on that book, the attack is obvious. Push the book hard in one direction during a quiet hour, trigger a cascade of liquidations, collect the other side. Exchanges that have used last price for risk calculations have been exploited this way repeatedly.

Mark price exists to make that attack uneconomic. It is deliberately harder to move than the order book it sits on.

Index price: the external anchor

LMEX calculates the index price for perpetual contracts as the average spot liquidity mid price across major exchanges.

The liquidity mid price is not a simple midpoint between bid and ask. LMEX weights it by size on each side:

Spot Liquidity Mid Price = (Bid Price × Ask Size + Ask Price × Bid Size) / (Bid Size + Ask Size)

The weighting matters more than it looks. A plain bid-ask midpoint treats a $50 bid and a $5 million ask as equal inputs. The size-weighted version pulls the mid towards whichever side carries real depth, which makes it far harder to distort by posting a token order at an extreme price.

Because the index averages across multiple external venues, moving it requires moving several real spot markets at once. That is no longer a manipulation; that is a market event.

Time-based futures use a different index

LMEX also lists time-based (expiring) futures, and those take the basis into account:

Time-Based Futures Index Price = Spot Liquidity Mid Price × (1 + Fair Basis)

An expiring contract legitimately trades away from spot — that gap is the cost of carry, and it narrows towards zero as expiry approaches. Applying a perpetual’s index formula to a time-based contract would misprice it systematically.

Mark price: fair value with LMEX’s own book included

Here is the formula that does the work. For LMEX perpetual contracts:

Mark Price = (Spot Liquidity Mid Price × 75%) + (LMEX Impact Mid Price × 25%)

And for time-based futures:

Mark Price = (Time-Based Futures Index Price × 75%) + (Liquidity Mid Price of LMEX Time-Based Futures Market × 25%)

Three-quarters of the mark price comes from outside LMEX. One quarter comes from LMEX’s own order book, via the impact mid price.

That 25% is not a weakness in the design, and it is worth understanding why it is there. A mark price anchored entirely to external spot would ignore what is actually happening on the venue where your position lives. If LMEX’s book genuinely diverges from spot — because of a large flow, a funding imbalance, a listing event — a purely external mark would value your position at a price you could not trade at. The 25% component keeps the mark grounded in LMEX’s real liquidity conditions while leaving the external index firmly in control.

The 2% condition most traders never read

This is the part that is buried in the documentation and almost never explained:

The spread between mark price and the LMEX perpetual futures liquidity mid price cannot exceed 2%. When the spread reaches or exceeds 2%, Mark Price = Index Price.

In plain terms: if LMEX’s own book drifts more than 2% away from the mark, LMEX stops blending and switches the mark price entirely to the external index.

This is a circuit breaker on the 25% component. In the exact conditions where LMEX’s own order book is least trustworthy — a dislocation, a liquidity vacuum, a cascade in progress — the local input is discarded and the mark reverts to pure external consensus.

For you as a trader, the practical consequence is this: in a genuine crisis, your liquidation level is being checked against the wider market, not against whatever is happening on the LMEX book at that moment. That is the behaviour you want, and it is worth knowing it is there before you need it.

What this means for your position

Your unrealised PnL follows mark price

The profit or loss shown on your open position is marked to mark price, not to the last trade. This is why your PnL can move when no trades are printing, and why it sometimes does not move when the chart clearly did.

If you are watching the candle and wondering why your PnL disagrees with it, you are watching the wrong number.

Your liquidation is checked against mark price

This is the one that matters. A wick on the LMEX chart that briefly prints through your liquidation level does not liquidate you if the mark price did not get there. The move has to be real enough to pull three-quarters of the mark from external spot markets.

The reverse also holds, and traders find this one more unpleasant. A position can be liquidated while the last price on your screen still looks survivable, if the external index has moved against you and the local book simply has not printed a trade at that level yet.

Your stop orders may follow a different price

Trigger price selection is a separate setting from the mark price mechanism, and it is a genuine decision rather than a default to accept.

A stop set against last price fires on any print, including wicks — fast, but easy to shake out of. A stop set against mark price is much harder to trigger spuriously, but will be slower to fire in a real move, because the mark has to drag the external index with it.

Neither is correct in the abstract. Short-term traders on liquid contracts are often better served by last price; position traders holding through volatility usually want mark. What you should not do is leave it unexamined and then be surprised by the behaviour.

A worked example

Suppose BTC-PERP on LMEX is quoting a last price of $100,000, and the external spot index is also at $100,000. You are long with a liquidation price of $97,000.

Scenario one — a local wick. A large market sell order sweeps the LMEX book down to $96,500 and it rebounds within seconds. Spot markets elsewhere never moved.

The index price stays near $100,000. The LMEX impact mid drops briefly. The mark price is 75% external and 25% local, so even if the local component fell hard, the mark barely moves — and if the spread between mark and the LMEX liquidity mid reached 2%, the local component was discarded entirely and the mark simply equalled the index. Your position survives. The chart shows a wick through your liquidation level and nothing happened, which is the system working as designed.

Scenario two — a genuine move. Spot markets across several venues fall to $96,800.

The index follows, because it is an average of those venues. The mark follows the index. Your position is liquidated. The chart on LMEX may not have printed a trade at $97,000 at all. The move was real, the mark reflected it, and the local book is irrelevant to that determination.

The distinction between these two scenarios is the entire reason mark price exists.

What to do with this

Size against mark price, not against the chart. When you are deciding how much room a position needs, the question is how far the external index would have to move, not how far a wick could reach.

Check the spread before entering on a thin contract. If the mark and last price are already notably apart on the contract you are about to trade, the book is dislocated from spot. That is information about liquidity, and it should affect your size.

Treat the 2% rule as a stress-condition feature. You will never see it in normal markets. It exists for the days that matter.

Do not confuse mark price with a price you can trade at. The mark is a valuation reference. When a liquidation actually executes, it executes into the book at whatever price the book offers, which in a dislocation can be considerably worse.

Frequently asked questions

Which price determines my profit and loss? Unrealised PnL on an open position is calculated from mark price. Realised PnL, once the position closes, is based on the prices you actually traded at.

Which price triggers liquidation? Mark price. Not last price, and not index price directly — though index price is 75% of mark price for perpetuals, and becomes 100% of it when the 2% spread condition is met.

Why do mark and last price differ? Last price is the most recent trade on LMEX’s book. Mark price is three-quarters external spot and one-quarter LMEX’s own depth-weighted mid. They will differ whenever LMEX’s book is moving faster or slower than the wider market.

How often does the mark price update? Continuously, as its inputs update.

Can the mark price be manipulated? Moving it requires moving the spot markets that make up the index, across multiple venues simultaneously. That is substantially harder and more expensive than pushing a single order book. It is not impossible in extreme conditions, which is why the 2% circuit breaker exists.

Does this work the same way for equity and commodity perps? The index construction differs because the underlying markets differ — and unlike crypto spot, equity and commodity reference markets are not open 24 hours. Check the contract specifications for the specific contract before assuming the crypto behaviour carries over.


Where to go next

If you want the mechanics of what happens when the mark price does reach your liquidation level — partial liquidation, the insurance fund, and auto-deleveraging — that is covered in How Liquidation Works on LMEX. If you want to calculate your own liquidation level before you enter, see Calculating Your Liquidation Price.

The live mark price, index price and funding rate for every contract are shown on the contract’s trading page.

 

LMEX exchange
LMEX

LMEX is a cryptocurrency exchange offering spot and derivatives trading with with no daily withdrawal limits and best-in-class liquidity aggregation. It supports a range of markets and tools designed for both individual and professional traders.